How to fix the air-float oven?

At present, the air-floating oven consists of a cabinet door and a cabinet door, and the main body of the shell is provided with a number of vertical partitions, and the vertical partitions have a number of drying chambers in the main body of the act of the shell. The exhaust pipe is fixed at the upper end of each drying chamber, the fixing bracket is fixed at the upper end of the cabinet door, the cooling fan is fixed in the frame of the housing, the collection hood and each air drying chamber are fixed at the inlet and outlet of the cooling fan, and the ventilation pipe is connected according to the ventilation pipe.

The electrical control cabinet is fixed on both sides of the main body of the server cabinet, and the electrical control cabinet is connected to the electrical components and electrical equipment in each drying chamber. Now, this new type of oven has a simple and practical structure and can separate different raw materials from the drying chambers. The relativity of the drying chamber spaces can be individually jeopardized to each other, can be used for the practical operation of air drying, can control the mobility of the separation and the natural ventilation and can be selected well for the different raw materials, this main parameter improves the efficiency of drying and can be observed according to the placement of the fully transparent windows of the drying chambers.

Nowadays, the new type of oven includes a drying chamber, while the air-float oven includes a main chamber located at the upper end of the structure and layout. The actuator of the partition is vertically provided with a partition which divides the partition into left and right inner chambers. The left inner chamber is provided with an air inlet, the right inner chamber is provided with a drain, and a cooling fan for a circulation system is also provided. The cooling fan of the circulatory system is provided directly below the shell, the air inlet of the cooling fan of the circulatory system is connected to the lower wall of the left inner cavity, and the inlet and outlet of the cooling fan of the circulatory system are provided with the cooling fan gases of the circulatory system and the right inner cavity respectively, which are connected to the lower wall. The new separated heat convection oven now uses the interior space directly below the oven to reduce the interior space occupied by the oven.

On the other hand, it makes it easier for employees to perform maintenance in the event of common failures of the cooling fans in the oven's circulation system. With increasingly stringent environmental regulations in the manufacturing industry, there is a need for technological innovation programs for dispensing components. According to the basic principle of radiation source heating, today's design of the oven is closely integrated with the heating and respiratory systems, replacing the original single product heating tube heating method, improving productivity, saving production and manufacturing of indoor space, to solve the heating problem, so the entire heating process is not prone to environmental pollution gas pollution.

The temperature in the air-float oven is caused by the work done by the electric heating wire R. In order to maintain the temperature control of the air-float oven, the electric heating wire must stop working after the temperature rises to the preset value; until the temperature decreases a little, the heating wire can continue to work. Frankly, the temperature control of the oven is maintained within the set range by the positive connection and disconnection of the key switched power supply. The switching of the power supply is dependent on the engagement and disengagement of the contacts of the automotive relay, whose attitude is controlled by the gate of the rectifier tube. Therefore, whether the rectifier is working properly to some degree will immediately jeopardize the pickup and release of the automotive relay contacts.